Cycle Guide - Kenmore 6600 Use & Care Manual

Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.
AUTO DRY -
Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.
Depending on model, temperature may be selected on cycle knob or be a separate control. Choose Normal to save energy.
Items to dry:
Jeans, heavy work
clothes, towels
Work clothes, medium
weight fabrics, sheets
Casual, shirts, pants,
lightweight items,
synthetics, delicates,
athletic wear
NOTE:
If loads do not seem as dry as you would like, select More the next time you dry a similar load. If loads seem drier than you like, select Less
the next time you dry a similar load.
Not all cycles and settings are available on all models.
TIME DRY
- Will run the dryer for the specified time on the control. Depending on model, temperature may be selected on cycle knob
or be a separate control.
Items to dry: Cycle:
Any load Time Dry
Rubber, plastic, heat Time Dry
sensitive fabrics
If your dryer has multiple temp settings:
A High Cottons temp setting may be used for drying heavyweight items such as towels and work clothes.
A Low Delicates to Medium Casual temp setting may be used for drying medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use a no temp (Air Only) setting for foam, rubber, plastic, or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for various loads, refer to the care label directions.
6
CYCLE GUIDE-AUTO DRY CYCLES
Drying
Dryness
Temperature: Level:
High More
Normal
Less
Medium More
Normal
Less
More
Low
Normal
Less
CYCLE GUIDE-TIME DRY CYCLES
Drying
Temperature:
Any
Air Only
Setting the Drying Temperature
Available
Options:
Wrinkle Guard™
Cycle Signal
Dry Temp
Wrinkle Guard™
Cycle Signal
Dry Temp
Wrinkle Guard™
Cycle Signal
Dry Temp
Available
Options:
Dries items to a damp level for items that do not require
Dry Temp
an entire drying cycle.
Wrinkle Guard™
Select a drying temperature based on the fabrics in your
load. If you are unsure of the temperature to select for a
load, select the lower setting rather than the higher setting.
Wrinkle Guard™ Use a no heat (air dry) setting for foam, rubber, plastic, or
heat-sensitive fabrics.
Cycle Details:
Automatic cycles give the best drying in the
shortest time. Drying time varies based on
fabric type, load size, and dryness setting.
Select a drying temperature based on the
fabrics in your load. If you are unsure of the
temperature to select for a load, select the
lower setting rather than the higher setting.
Cycle Details: