Cycle Guide - Kenmore 110.65132410 Use & Care Manual

CYCLE GUIDE – AUTO MOISTURE SENSING™ CYCLES
AUTO MOISTURE SENSING™ –
the selected dryness level. Depending on model, temperature may be selected on cycle knob or be a separate control.
Choose Normal to save energy.
Items to Dry:
Jeans, heavy work
clothes, towels
Work clothes, medium
weight fabrics, sheets
Casual, shirts, pants,
lightweight items,
synthetics, delicates,
athletic wear
NOTE: If loads do not seem as dry as you would like, select More next time you dry a similar load. If loads seem drier than you like,
select Less next time you dry a similar load.
TIMED DRY –
Will run the dryer for the specifi ed time on the control. Depending on model, temperature may be selected on cycle
knob or be a separate control.
Items to Dry: Cycle:
Any load
Timed Dry
Any load Touch Up
Rubber, plastic, heat Air Only
sensitive fabrics
If your dryer has multiple temp settings:
A High Cotton temp setting may be used for drying heavyweight items such as towels and work clothes.
A Low Delicates or Medium Casual temp setting may be used for drying medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use an Air Only (no heat) setting for foam, rubber, plastic, or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for various loads, refer to the care label directions on the items.
6
Senses moisture in the load or air temperature and shuts off when the load reaches
Dry
Dryness
Temp:
Level:
More
High Cotton
Normal
Less
Medium Casual More
Normal
Less
Low Delicates More
Normal
Less
CYCLE GUIDE – TIMED DRY CYCLES
Dry
Temp:
Any
Any
No heat
Setting the Drying Temperature
Available
Options:
Wrinkle Guard™ omatic cycles give the best drying in the
Aut
Cycle Signal shortest time. Drying time varies based on
Dry Temp load size and dryness setting.
Select a drying temperature based on the
Wrinkle Guard™
fabrics in your load. If you are unsure of the
Cycle Signal
temperature to select for a load, select the
Dry Temp
lower setting rather than the higher setting.
Wrinkle Guard™
Cycle Signal
Dry Temp
Available
Options:
Dry Temp Select a drying temperature based
Cycle Signal on the fabrics in your load. If you are
unsure of the temperature to select for
a load, select the lower setting rather
than the higher setting.
Cycle Signal This is the last step in a cycle that
uses heat. The load is cooled slowly to
reduce wrinkling and make it easier to
handle. Use this cycle to smooth wear
or packing wrinkles.
Use an Air Only (no heat) setting for
Time Adjustment
foam, rubber, plastic, or heat-sensitive
Cycle Signal
fabrics.
Cycle Details:
Cycle Details: