Cycle Guide - Kenmore 110.65212610 Use & Care Manual

AUTO DRY –
Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.
Choose Normal to save energy.
tems to ry:
eans, heavy work
clothes, towels
Work clothes, medium
weight fabrics, sheets
Casual, shirts, pants,
lightweight items,
synthetics, delicates,
athletic wear
T : If loads do not seem as dry as you would like, select
select ess ne t time you dry a similar load.
TIMED DRY –
Will run the dryer for the specifi ed time on the control.
tems to ry: Cycle:
Any load
Timed Dry
Any load Touch Up
Rubber, plastic, heat Air Only
sensitive fabrics
If your dryer has multiple temp settings
A igh Cotton temp setting may be used for drying heavyweight items such as towels and work clothes.
A ow elicates or edium Casual temp setting may be used for drying medium weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use an Air nly (no heat) setting for foam, rubber, plastic, or heat sensitive fabrics.
ine dry bonded or laminated fabrics.
T : If you have questions about drying temperatures for various loads, refer to the care label directions on the items.
6
CYCLE GUIDE – AUTO DRY CYCLES
ry
ryness
Tem :
e el:
ore
igh Cotton
Normal
ess
edium Casual ore
Normal
ess
ow elicates ore
Normal
ess
CYCLE GUIDE – TIMED DRY CYCLES
ry
Tem :
Any
Any
No heat
etting t e rying Tem erat re
A ailable
tions:
Wrinkle Guard™
Cycle Signal
Dry Temp
Wrinkle Guard™
Cycle Signal
Dry Temp
Wrinkle Guard™
Cycle Signal
Dry Temp
ore ne t time you dry a similar load. If loads seem drier than you like,
A ailable
tions:
Dry Temp
Cycle Signal
Cycle Signal
Time Adjustment
Cycle Signal
Cycle etails:
omatic cycles give the best drying in the
Aut
shortest time. Drying time varies based on
load si e and dryness setting.
Select a drying temperature based on the
fabrics in your load. If you are unsure of the
temperature to select for a load, select the
lower setting rather than the higher setting.
Cycle etails:
Select a drying temperature based
on the fabrics in your load. If you are
unsure of the temperature to select for
a load, select the lower setting rather
than the higher setting.
This is the last step in a cycle that
uses heat. The load is cooled slowly to
reduce wrinkling and make it easier to
handle. Use this cycle to smooth wear
or packing wrinkles.
Use an Air nly (no heat) setting for
foam, rubber, plastic, or heat-sensitive
fabrics.