Component, Video Format, Hdmi, Frame Lock - Hitachi PJ-TX200 User Manual

Advanced Menu (INPUT menu)
Item
Using the ▲/▼ cursor buttons changes the COMPONENT port
mode.
 COMPONENT
COMPONENT
 SCART RGB
Using the ▲/▼ cursor buttons changes the video format mode.
 AUTO
VIDEO FORMAT
 NTSC, PAL, SECAM, NTSC4.43, M-PAL, N-PAL
- NOTE -
• The AUTO mode may not work well for some signals. In this
situation select a suitable mode other than AUTO.
Using the ▲/▼ cursor buttons changes the HDMI signal mode.
 AUTO
 NORMAL
HDMI
 ENHANCED
- NOTE -
• If the contrast of the screen image is too strong or too weak, try to
find a more suitable mode.
Using the ▲/▼ cursor buttons turns the frame lock function on and
off.
When TURN ON is selected, videos are displayed more smoothly.
FRAME LOCK
- NOTE -
• The FRAME LOCK function can only be used for computer (RGB)
signals with a vertical frequency of 50 to 60 Hz.
• When FRAME LOCK is enabled there may be some picture
degradation. If this occurs, select TURN OFF.
(Continued on next page)
46
COMPONENT  SCART RGB
The COMPONENT port works with a component video signal
input.
The COMPONENT port works with an SCART RGB signal input.
Please refer to "Connecting your devices" (14).
AUTO  NTSC  PAL  SECAM  NTSC4.43  M-PAL  N-PAL
Automatically selects an optimum mode.
The selected video format is used.
AUTO  NORMAL  ENHANCED
Automatically selects an optimum mode.
Suitable for DVD signals (16-235).
Suitable for VGA signals (0-255).
TURN ON  TURN OFF
Description