Table of Contents
Advertisement
INPUT menu
Item
VIDEO FORMAT
COMPUTER IN
FRAME LOCK
(continued on next page)
32
The video format for S-VIDEO port and VIDEO port can be set.
追
(1) Use the ▲/▼ buttons to
select the input port.
S-VIDEO
VIDEO
(2) Using the ◄/► buttons
switches the mode for video
format.
AUTO
NTSC
N-PAL
• This item is performed only for a video signal from the VIDEO port
or the S-VIDEO port.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some signals. If the
picture becomes unstable (e.g. an irregular picture, lack of color),
please select the mode according to the input signal.
Use the ◄/► buttons to select
the computer input signal type.
AUTO
SYNC ON G OFF
• Selecting the AUTO mode allows
you to input a sync on G signal or component signal from the port.
• In the AUTO mode, the picture may be distorted with certain
input signals. In such a case, remove the signal connector so that
no signal is received and select the SYNC ON G OFF, and then
reconnect the signal.
Use the ◄/► buttons to turn the
frame lock function on/off .
ON
OFF
• This item can be performed only on a signal with a vertical
frequency of 49 to 51Hz, 59 to 61 Hz.
• When ON is selected, moving pictures are displayed more
smoothly.
• This function may cause a certain degradation of the picture. In
such a case, please select OFF.
Description
PAL
SECAM
M-PAL
NTSC4.43
追
Advertisement
Table of Contents
