INPUT menu
The following functions are accessible via the INPUT
menu. After selecting an item according to the
procedure described in the preceding "Advanced
Menu operation" section (35), refer to the following
table for details on operating the selected item.
Item
Using the ▲/▼ cursor buttons in the PROGRESSIVE menu
changes the interpolation mode of an interlaced signal.
TV
FILM
PROGRESSIVE
- NOTE -
• The PROGRESSIVE function can only be used for interlaced
video, s-video, or component video 525i (480i) or 625i (576i) 1125i
(1080i) signals.
• The TV and FILM modes may cause certain picture defects (ex.,
jagged lines). If this occurs, select TURN OFF, although the screen
image may lose its crispness.
Using the ▲/▼ cursor buttons changes the color space mode.
AUTO
RGB, SMPTE240, REC709, REC601
COLOR SPACE
- NOTE -
• The COLOR SPACE function can only be used for signals from
the COMPUTER, HDMI or COMPONENT VIDEO ports excluding
component video 525i (480i) or 625i (576i), or SCART RGB signals.
• The AUTO mode may not work well for some signals. In this
situation select a suitable mode other than AUTO.
(Continued on next page)
TV FILM TURN OFF
This mode makes the screen image crisper.
This mode makes the screen image crisper, and this mode can
also be adapted to the 3-2 Pull-Down system.
AUTO RGB SMPTE240 REC709 REC601
Automatically selects an optimum mode.
The selected color space is used.
Advanced Menu (INPUT menu)
MENU [COMPUTER]
PROGRESSIVE FILM
PICTURE
IMAGE
COLOR SPACE AUTO
INPUT
COMPONENT COMPONENT
VIDEO FORMAT AUTO
SETUP
SCREEN
HDMI NORMAL
FRAME LOCK TURN OFF
OPTION
S‑ASPECT TURN OFF
EASY MENU
INFORMATION
Description
:SELECT
45