Arrangement - Hitachi PJ-TX200 User Manual

Preparations

Arrangement

Arrange the projector according to the manner in which you will use the projector
and the environment the projector will be used in.
On a horizontal
surface
Suspended from
the ceiling
WARNING
► Place the projector in a stable, horizontal position. If the
projector falls or is knocked over it could result in injury and/or damage to the
projector. Using a damaged projector could result in fire and/or electric shock.
• Do not place the projector on an unstable, slant or vibratory surface such as a
wobbly or inclined stand.
• Do not stand the projector on its side, front or rear faces.
• Contact your dealer before ceiling installations and similar.
► Place the projector in a cool place, with adequate ventilation. The high
operating temperature of the projector could cause burns, fire and/or projector
malfunction if not properly placed.
• Do not block or cover the projector's vents.
• Maintain a space of at least 30 cm between the sides of the projector and other
objects such as walls.
• Do not place the projector on metallic objects or objects susceptible to heat.
• Do not place the projector on carpets, cushions or bedding.
• Do not place the projector in direct sunlight or near heat sources, such as
heaters.
• Do not place anything on or near the projectors lens or vents. Do not place
anything on top of the projector.
• The projector also has intake vents on the bottom. Do not place anything that
may be sucked into or stick to the vents underneath the projector.
► Do not place the projector any place where it may get wet. Placing the
projector in a humid place or inserting liquid in the projector could cause fire, an
electric shock and/or malfunction to the projector.
• Do not place the projector in a bathroom or outdoors.
• Do not place anything containing liquid near the projector.
10
(b)
(a)
(c)
(a)
(c)
(b)