Easy Menu Functions; Aspect - Hitachi PJ-TX200 User Manual

5.
To operate the selected item
Use the ◄/► cursor buttons to operate the item. For details please see the
following descriptions.
6.
To reset the operation
Press the RESET button while the item is selected.
(Does not reset the LANGUAGE item.)
7.
To close the menu
Press the MENU button to close the menu. The menu will automatically close
after several seconds without user input.

EASY MENU functions

The following functions are accessible via the EASY MENU. After selecting
an item according to the procedure described in the preceding "EASY MENU
operation" section, refer to the following table for details on operating the selected
item.
Item
Using the ◄/► cursor buttons changes the aspect ratio.
 For a computer (RGB) signal
 For an HDMI signal
 For a video, s-video or component video signal
 For no signal or an unrecognized signal

ASPECT

- NOTE -
• The NORMAL mode uses the signal's original aspect ratio.
• Performing an automatic adjustment initializes the aspect ratio
setting.
• The ASPECT function can also be accessed using the ASPECT
button on the remote control (24) or via the IMAGE menu in the
Advanced Menu (43).
(Continued on next page)
NORMAL  4:3  16:9
NORMAL  4:3  16:9  WIDE  MOVIE1  MOVIE2 14:9
4:3  16:9  WIDE  MOVIE1  MOVIE2  14:9
16:9 (fixed)
4:3 16:9
16:9
Example for
NORMAL
a 16:9 signal
Example for
4:3
NORMAL
a 4:3 signal
Description
WIDE MOVIE1 MOVIE2
EASY MENU
14:9
31