Setup Menu; Keystone, Whisper, Mirror - Hitachi PJ-TX200 User Manual

Advanced Menu (SETUP menu)

SETUP menu

The following functions are accessible via the
SETUP menu. After selecting an item according to
the procedure described in the preceding "Advanced
Menu operation" section (35), refer to the following
table for details on operating the selected item.
Item
Using the ▲/▼ cursor buttons adjusts the vertical keystone. Please
make adjustments while checking the picture.
- NOTE -
KEYSTONE
• The adjustable correction range will vary among different inputs.
This function may not work well for some types of input.
• This function may not work well if the projector screen is angled
up or down and the MIRROR item ( Below) in the SETUP sub-
menu is set to V:INVERT or H&V:INVERT.
Using the ▲/▼ cursor buttons turns the WHISPER function on and
off.
When WHISPER is selected, acoustic noise and screen brightness
WHISPER
are reduced. It may take several minutes for the change in
brightness to occur.
- NOTE -
• The WHISPER function cannot be used for several minutes after
the projector lamp first lights up.
Using the ▲/▼ cursor buttons changes the mirror mode.
MIRROR
- NOTE -
• The MIRROR function can also be accessed via the EASY MENU
(33).
48
Reduce top of the image  Reduce bottom of the image
NORMAL  WHISPER
NORMAL  H:INVERT  V:INVERT  H&V:INVERT
MENU [COMPUTER]
PICTURE KEYSTONE +0
IMAGE WHISPER NORMAL
INPUT MIRROR NORMAL
SETUP
SCREEN
OPTION
EASY MENU
Description
:SELECT