Removing The Heatsink Assembly (With Fan) (Hp Authorized Service Providers Only) - HP Omnibook XE3 Service Manual

Removing the Heatsink Assembly (with Fan)
(HP Authorized Service Providers Only)
Required Equipment
•
#0 Phillips screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
2. Remove these additional assemblies:
•
Keyboard cover (page 2-8).
•
Keyboard (page 2-10).
•
Display assembly (page 2-16).
•
Top case (page 2-19).
•
Hinge saddle set (page 2-22).
3. Disconnect the fan cable from the motherboard.
4. Remove all four retaining screws (their springs are attached to them).
5. Lift the heatsink out of the notebook.
2-24 Removal and Replacement HP Omnibook XE3 (Technology Code GF)