Removing The Heatsink Assembly (With Fan) (Hp Authorized Service Providers Only) - HP OmniBook XE3 Service Manual
Notebook
Hide thumbs
Also See for OmniBook XE3:
- Evaluator manual (188 pages) ,
- Reference manual (151 pages) ,
- Service manual (117 pages)
Table of Contents
Advertisement
Removing the Heatsink Assembly (with Fan)
(HP Authorized Service Providers Only)
Required Equipment
• Small Phillips screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
2. Remove these additional assemblies:
• Keyboard cover (page 2-9).
• Keyboard (page 2-11).
• Display assembly (page 2-17).
• Top case (page 2-19).
• Hinge saddle set (page 2-22).
3. Disconnect the fan cable from the motherboard.
4. Remove all four retaining screws (their springs are attached to them).
5. Lift the heatsink out of the notebook.
HP OmniBook XE3
Removal and Replacement
2-27
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
