Removing the Heatsink (with Fan)
(HP Authorized Service Providers Only)
Required Equipment
Small Phillips screwdriver.
Knife or scraper.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery and any secondary battery module.
2. Remove these additional assemblies:
Power button panel (page 2-11).
Keyboard (page 2-13).
3. Disconnect the fan cable. Access the cable through the opening in the heatsink (near the fan).
4. Remove all five retaining screws.
IMPORTANT: See the
Caution on the next
page before reinstalling
the heatsink!
HP Omnibook XT6050, XT/VT6200
Figure 2-12. Removing the Heatsink
Screws, M2.5×6mm (5)
Fan cable
Fan cable socket
Removal and Replacement
2-15