Removing The Floppy Disk Drive (Hp Authorized Service Providers Only) - HP Omnibook XE3 Service Manual

Removing the Floppy Disk Drive
(HP Authorized Service Providers Only)
Required Equipment
•
#0 Phillips screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
•
Keyboard cover (page 2-8).
•
Keyboard (page 2-10).
•
Display assembly (page 2-16).
•
Top case (page 2-19).
•
Hinge saddle set (page 2-22).
2. Release the drive's ribbon cable from its connector on the motherboard.
3. Remove the two retaining screws.
4. Lift the floppy drive out of the notebook.
HP Omnibook XE3 (Technology Code GF) Removal and Replacement 2-29