Removing The Cd/Dvd Drive (Hp Authorized Service Providers Only); Figure 2-22. Removing The Cd/Dvd Drive - HP Omnibook XE3 Service Manual

Removing the CD/DVD Drive
(HP Authorized Service Providers Only)
Required Equipment
•
#0 Phillips screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
•
Keyboard cover (page 2-8).
•
Keyboard (page 2-10).
•
Hard disk drive (page 2-12).
•
Display assembly (page 2-16).
•
Top case (page 2-19).
•
Hinge saddle set (page 2-22).
2. Pull the drive to the right, off of its connector and out of the notebook.
Reassembly Notes
•
Place the drive so that its connector aligns with that on the motherboard, then gently press it to the
left and into place.
HP Omnibook XE3 (Technology Code GF)

Figure 2-22. Removing the CD/DVD Drive

Removal and Replacement 2-31