HP Omnibook XE3 Service Manual page 87

Symptom Call Center:
Suggestions
Notebook still on Press Ctrl+Alt+Del and end
but stops any application not
responding. responding.
Slide and hold power switch
four seconds to turn off and
reset notebook, then press
blue standby button to turn
notebook back on.
If this fails, insert a
straightened paper clip into
system-off switch, then press
blue standby button to turn
notebook back on.
Port replicator
Docking product I/O Make sure AC power is
problems. connected to port replicator.
Make sure notebook is fully
inserted in port replicator.
Check notebook's power
supply.
Try using corresponding port
on notebook while undocked.
Notebook locks up Make sure notebook has
when docking or completely entered or
undocking. resumed from standby or
hibernate mode before
docking or undocking.
Port on port Make sure notebook is
replicator isn't docked properly.
working.
Reset the computer.
3-22 Troubleshooting and Diagnostics
Repair Center: Repair Center:
Likely Causes Comments
Port replicator. Test corresponding notebook
ports while undocked.
Motherboard.
Port replicator is not
repairable, and must be
exchanged.
Port replicator.
HP Omnibook XE3 (Technology Code GF)