Sony SRW-1 Operation Manual page 51

Item
REFERENCE MODE
Reference signal
selection
EXTERNAL
TEST SG VIDEO
Test signal output
settings
Note
Both VIDEO and
AUDIO
AUDIO settings
return to the default
OFF when you power
the system off.
LCD LIGHT OFF
Display backlight
settings
BRIGHT
SAVER
SAVER MSG
KEYMAP EJECT
Key map settings EJECT button function
STOP
STOP button function
PLAY
PLAY button function
REC
REC button function
REW
REW button function
FFWD
F FWD button function
PAUSE
PAUSE button function
Settings
Selects the input signals to use as reference signal.
INP [Input]: Video signals input to the HD SDI IN A/B connectors.
EXT [External]: Signals selected with the next item EXTERNAL.
When the previous item MODE is set to EXT, selects the signals to use as
reference signal.
HD [HD]: During playback and audio signal recording, use an HD tri-level sync
signal input to the REF IN HD connector.
SD [SD]: When the frame frequency is 29.97 Hz or 25 Hz, use a VBS signal
input to the REF IN SD connector.
HD&SD [HD&SD]: When the frame frequency is 23.98 Hz, use an HD tri-level
sync signal input to the REF IN HD connector, and a VBS signal input to
the REF IN SD connector.
Determines whether to make the internal video signal generator generate a
test signal.
OFF [Off]: Generate no test signal.
CB [Color Bar]: Generate a color bar signal.
BLK [Black]: Generate a black signal.
Determines whether to make the internal audio signal generator generate a
test signal.
Settings for internal audio signal generator
OFF [Off]: Generate no test signal.
1KHz [1KHz]: Generate a sine wave signal of 1 kHz.
NONE [Silence]: Generate a muted signal.
Determines whether to turn the backlight off after a specified interval.
DIS [Disable]: Do not turn off.
5sec [5sec]: Turn off after 5 seconds.
10sec [10sec]: Turn off after 10 seconds.
30sec [30sec]: Turn off after 30 seconds.
1min [1min]: Turn off after 1 minute.
3min [3min]: Turn off after 3 minutes.
5min [5min]: Turn off after 5 minutes.
Sets the brightness of backlight.
0 to 31 (20)
Determines whether to display a screen saver after a specified interval.
DIS [Disable]: Do not display.
1min [1min]: Display after 1 minute.
3min [3min]: Display after 3 minutes.
5min [5min]: Display after 5 minutes.
10min [10min]: Display after 10 minutes.
20min [20min]: Display after 20 minutes.
30min [30min]: Display after 30 minutes.
1hour [1hour]: Display after 1 hour.
Sets a screen saver message.
DIS [Disable]: Disable the button.
ENA [Enable]: Enable the button.
51
4-5 SYSTEM Setup Menu