Install Memory Card - AMT Datasouth Fastmark M5 Plus Series User Manual

3.9 Install Memory Card

1. Turn the printer upside down.
2. Remove the screw that fixes the memory card cover.
3. Plug in the memory card on main board.
M5 Model (Option)
4. Close the memory card cover.
* Recommended SD card specification.
SD V 1.0, V 1.1
128MB
256MB
512MB
1GB
-Supported DOS FAT file system.
-Folders stored on the SD card should be in the 8.3 filename format.
-Approved SD card manufacturer: SanDisk, Transcend.
Document #120522 Rev-A
M5 PLUS Model (SD Card)
SD V 2.0 (SDHC)
4GB class 6
23
Screw
Memory Card Cover