Bosch MIC440 Operation Manual page 51

MIC440 Explosion-protected Camera
Set Baud 1200
Set Baud 2400
Set Baud 4800
Set Baud 9600
Show Startup
[Boot]Message
Address Change
Camera Command
Preset1 to Preset10
Camera Recalibrate
Inverted (Adjusts the
pan controls)
Upright (Adjusts the
pan controls)
Pelco D Patterns
To Record/playback a Pattern: (Save Presets prior to this!)
1. Select the TOUR number to be recorded using Learn # (50 to 55 for Pattern 1 to 6); (Pelco
requires entering the number, and then PRESS & HOLD the PRESET key for greater then 3
seconds. E.g. Pattern 6 would be 55, Press & Hold PRESET > 3 seconds.
2. START the Recording using Learn 48. (enter 48, Press & Hold PRESET).
3. Go to Preset #, wait the dwell time, go to next preset #, etc. (1 PRESET, 2 PRESET, etc.; this
time just press & release the Preset key).
NOTE: As a result, the MIC will move to Preset 1, stay there until the next preset command is
received (say 10 seconds), then move to the Next Preset.
4. STOP the Recording using Learn 49. (enter 49, Press & Hold PRESET).
5. Press the PATTERN key to playback that last activated/recorded tour.
Pelco D Change Address PRESET 60
To change the address of a camera, Learn preset 60 twice, then learn another preset. The
number of the preset will become the new address. For example, to set a camera to address
32, Learn presets 60,60,32 without moving the camera or sending any other data in between.
Inverted/Upright
For units mounted like a dome, the left and right is reversed. Set this by learning preset 80
INVERTED Learn Preset 80
UPRIGHT Learn Preset 81
Bosch Security Systems, Inc.
N/A N/A N/A N/A
N/A N/A N/A Learn
28
N/A N/A N/A Learn
41
N/A N/A N/A Learn
40
N/A N/A Learn N/A
99
Use Bosch Use See
Cams AUX Cams notes.
et; 14 & et Valid
Valid 21 Valid Range
Range Valid Range 1-254
1-99 Range 1-254
1- 126
N/A N/A Go To Go To
240-2 240-249
49
Learn N/A Learn Learn
50 251 94
N/A N/A N/A Learn
80
N/A N/A N/A Learn
81
Operation Manual
Operation | en
106
N/A
N/A
105
N/A
126 Pelco: Learn 60 Twice; then
Learn # for new address
240-2
49
N/A
N/A
N/A
51
2013.11 | 8.1 |