Bosch MIC440 Operation Manual page 36

36 en | Install the MIC Power Supply Unit (PSU)
14. Place the ring terminal onto the earth termination post.
15. Replace the copper washer. Secure with the brass nut.
Figure 11.4: Mains input with shield removed, showing terminal block HD1 before wiring
Number
1
2
3
16. Replace the internal shield, taking care to avoid pinching the cables. Tighten the screws.
17. Feed the unconnected end of the shielded composite cable through the top-right M16
cable gland (item 2 in the figure "MIC PSU Enclosure, with cable glands identified").
Figure 11.5: MIC PSU Enclosure, with cable glands identified
2013.11 | 8.1 |
Description
Earth core cable to enclosure lid
Earth core cable to power supply PCB
Earth termination post
Operation Manual
MIC440 Explosion-protected Camera
Bosch Security Systems, Inc.