Operation - Bosch MIC440 Operation Manual

MIC440 Explosion-protected Camera
15

Operation

For operation of the MIC440, refer to the tables below for the list of support protocols and
commands.
Aux Function
1 Focus Control
2 Digital Zoom Enable
3 Iris Control
4 Auto Lowlight
5 Wiper
6 Washer
7 Proportional PTZ
8 IR Lamps
9 Camera Power
10 Backlight
11 B&W
12 OSD
13 Shutter Speed (1/2 s)
14 Address Change Stage
1
15 Pan Reverse
16 Auto Alarm
Bosch Security Systems, Inc.
Description (MIC function)
On: Enables Manual Focus
Off: Disables Manual Focus => Auto Focus
On: Digital Zoom is enabled
Off: Digital Zoom is disabled
On: Enables Manual Iris
Off: Disables Manual Iris => Auto Iris
On: Enables Auto Lowlight, Decrease frame rate for low light conditions
Off: Disables Auto Lowlight, Returns to Auto Iris
On: Wiper On
Off: Wiper Off
On: Washer On
Off: Washer Off
On: Enabled, Pan and Tilt Speed is scaled according to Zoom position
Off: Disabled, Normal PTZ
On: Switches IR Cut Filter & Lamps On
Off: Switches IR Cut Filter & Lamps Off
On: Video Output from Sony Camera module is enabled
Off: Video Output from Sony Camera module is disabled
On: Backlight On
Off: Backlight Off
On: Black & White Mode
Off: Color Mode
On: Shows Sony camera module On-Screen-Display
Off: Hides Sony camera module On-Screen-Display
On: Sets Shutter Speed to 1/2 s (fixed)
Off: Returns to Auto Iris
On: Sets variable for Address Changing -> must call Aux 21 On, to continue
Off: Clears variable for Address Changing
SEE NOTE 1.
On: Pan direction is reversed
Off: Pan direction is normal
On: Enables Auto Alarm
Off: Disables Auto Alarm
Operation Manual
Operation | en 45
2013.11 | 8.1 |