Pf8D Specifications - Intermec PF8d User Manual

Appendix A — Specifications

PF8d Specifications

General Specifications
Resolution 8 dot/mm (203 dpi)
Print Mode Direct Thermal
CPU 32 bit
Memory 4 MB flash, 8 MB SDRAM
Print Speed 2, 3, and 4 ips
Print Length Maximum 1727 mm (68 in)
Minimum 12.0 mm (0.47 in)
Print Width Maximum 104 mm (4.09 in)
Sensor Type Adjustable reflective sensor. Fixed transmissive sensor is center-
aligned.
Sensor Detection Label gap and black mark sensing, Label length autosensing and/or
program command setting.
Media Label roll outside diameter: Maximum 127 mm (5 in)
Core diameter: 25 mm, 38 mm (1 in, 1.5 in)
Width: 25 mm to 118 mm (1 in to 4.65 in)
Thickness: 0.05 to 0.18 mm (.002 to .007 in)
Firmware ESim (v7.x or later)
Software ActiveX Controls (v1.3 or later)
InterDriver (v7.06 or later)
ESim Config Tool (v2.1 or later)
LabelShop Patch (v6.12 or later))
Resident Fonts 6, 7, 10, 12, 24 points
Fonts Download Windows bitmap font: Can be rotated in 8 orientations and
expandable 8 times horizontally and vertically
TrueType Font: v2.xx can be rotated in 4 orientations
Image Handling BMP, PCX, Support ICO, WMF, JPG, EMF files through software.
Bar Codes Code 39, Code 93, Code 128 (subset A, B, C), UCC/EAN-128, UPC A /
E (add on 2 & 5), I 2 of 5, I 2 of 5 with check digit, I 2 of 5 with human
readable check digit, EAN 8 / 13 (add on 2 & 5), Codabar, Post NET,
MaxiCode, PDF417, Datamatrix code, QR code, UPC SCC, EAN?UCC
composite code
erial port: RS-232 (Baud rate: 1200 to 115200, XON/XOFF,
Interfaces S
RTS/CTS)
USB port: v2.0
Parallel port: Compatible mode
32 PF8d/PF8t Printer User's Guide