Adjusting The Printhead Alignment - Intermec PF8d User Manual

Adjusting the Printhead Alignment

PF8d/PF8t Printer User's Guide
Chapter 3 — Troubleshooting and Maintaining the Printer
To adjust thermal printhead pressure
1 Turn off power to the printer.
2 Press the cover open buttons on both sides of the case to open the
top cover. Lift the cover upwards and rearwards.
3 Using a straight-slot screwdriver, turn the screws clockwise to
increase printhead pressure or counterclockwise to decrease
printhead pressure.
Adjustment
screws
(2 places)
PF8t Printhead Adjustment Screws
You can improve the print quality by adjusting the alignment between
the printhead and the platen roller.
27