Plain Continuous Stock - Intermec PF8d User Manual

Appendix B — Media Specifications

Plain Continuous Stock

50
The PF8 printers can use continuous stock without any detection
slots or black marks. The printer must be set for continuous stock by
using the ESim Q command. For more information, see the ESim for
the PC4 and PF8 Printer Programmer's Reference Manual
(P/N 937-011-xxx).
The length of each copy is decided by the size of the print image and
any additional media feed is decided by the Q command. Continuous
stock cannot be used in the Auto-Sensing mode.
Tag or strip width (a)
Maximum: 116.0 mm (4.57 in)
Minimum: 25.0 mm (1.00 in)
PF8d/PF8t Printer User's Guide