Intermec PF8d User Manual page 36

PF8d/PF8t Printer User's Guide
3 Lift the print carriage halfway up while keeping the top cover fully
opened. Insert a new ribbon roll onto the ribbon supply shaft.
4 Feed the transfer ribbon from the ribbon supply shaft under the
printhead.
5 Wrap the ribbon around the ribbon shaft. Using the tape fitted at
the front of the ribbon leader, attach the leader to the top of the
rewind core. Be careful to center align the ribbon leader with the
core.
6 Close the print carriage by pressing firmly down on both sides. A
loud click indicates the print carriage locked into place.
Chapter 2 — Installing the Printer
21