Installing The Printer Driver - Intermec PF8d User Manual

Chapter 2 — Installing the Printer

Installing the Printer Driver

8
You must install the Intermec InterDriver print driver in order to
communicate with your PF8 printer. The InterDriver files are on the
PrinterCompanion CD or available for download from the Intermec
web site at http://www.intermec.com.
Downloads, and then search for "interdriver".
To install InterDriver
1 Load the PrinterCompanion CD into your desktop computer.
2 On the main screen, click Software. The InterDriver with ActiveX
Controls introduction screen appears. For a copy of these
instructions, click Installation Instructions at the bottom of the
page.
3 Click Install InterDriver.
4 The File Download - Security Warning screen appears. Click Run
to run the executable.
5 The Internet Explorer Security Warning screen appears. Click Run
to start the InterDriver installation.
6 The Intermec End User License Agreement appears. Read the
agreement and select the radio button to accept the agreement,
and then click Next.
7 The Installation Directory screen appears. The default installation
directory is c:\Intermec\InterDriver7. Click Next to use the default
directory or specify a different location to install the files.
8 Clear the Run Add Print Wizard after unpacking drivers check
box and click Finish.
9 On the New Hardware Wizard screen, select Install from a list or
specific location and then click Next to continue.
Note: For LPT connections, you must restart your computer for
Windows to detect the new hardware. For USB connections, the
New Hardware Wizard will launch automatically when the printer
is connected and turned on.
10 On the Search and Installation Options screen, click Next.
Click Support, click
PF8d/PF8t Printer User's Guide