INSTALLATION
SITING THE UNIT
WATWER CONNECTIONS
ELECTRICAL CONNECTIONS
CONTROL WIRING (OPTIONAL)
FILLING THE SYSTEM
FLUSHING WATWER AN AIR
CHEECKING FOR WATWER LEAKS
CONFIGURING AND CHECKING THE SYSTEM
SM_30AW.indd 9
POWER WIRING
Installation location
disruptive to your neighbours.
feet.
be raised at least 200 mm above the usual snow level.
CAUTION:
wind like a coast or on a high storey of a building, ensure normal fan
operation by using a duct or a wind shield.
strong wind such as the upper stairs or rooftop of a building, apply
windproof measures referring to the following:
Examples:
right angle to any seasonal wind direction.
pump, install the unit so that the discharge port is set at right angle to
the wind direction.
Do not install the unit in such places below.
as from audio equipment, welders, and medical equipment.
9
3
Installation
Strong wind
30AW
14-03-2011 14:41:09