Replacement Of The Main Parts - Carrier 30AWH004HB Service Manual

8.3 Replacement of the main parts

N° Exchange Work procedure (IMPORTANT: Ensure gloves are
parts worn at all times to avoid risk of injury)
name
(1) Common Detachment
procedure
switch of the breaker.
After unscrewing the screws, remove the front
panel while drawing it downward.
3. Remove the power cable from cord clamp and
terminal.
Attachment
6. Connect the power cable and to terminal, and
then fix them with cord clamp.
REQUIREMENT
Secure the power cables using a tie-wrap or rub-
ber band to ensure they do not come into contact
with the compressor, valves and discharge pipe.
(2) Side Detachment
cabinet
1. Perform the work from 1 to 4 of (1).
2. Remove the screws fixing the inverter assembly
3. Remove the screws fixing the GMC assembly and
4. Remove the screw for the side cabinet and the
5. Remove the screw for the side cabinet and the
6. Remove the screws for the side cabinet and heat
7. Remove the screws of the side cabinet and the
Brazzed plate heat exchanger assembly. (ST8P
Attachment
8. Replace the cabinet removed and attach the
(3) Air-outlet Detachment
cabinet
1. Perform the work from 1 to 4 of (1).
2. Remove the screws for the air-outlet cabinet and
3. Remove the screws for the air-outlet cabinet and
4. Remove the screws for the air-outlet cabinet and
5. Replace the cabinet removed and attach the
SM_30AW.indd 103
Remarks
30 AWH 004, 30 AWH 006, 30 AWH 008
Gloves
Inverter assembly
Heat exchanger
Motor fan
103
Maintenance
Side cabinet
GMC assembly
8
Front panel
Roof plate
Air outlet cabinet
30AW
14-03-2011 14:46:29