Lower Surround Panel - Travis Industries DVS Insert EF II Owner's Manual

Optional Equipment (for qualified installers only)

Lower Surround Panel

The older lower surround panel (sku 98500619 and 98500628) are installed in a different fashion
than illustrated in the instruction sheet included with the panel. Follow the directions below.
1 Prepare the panel following the directions below.
Discard the
bottom clips
2 Attach the panel to the insert following the directions below.
Attach the lower surround panel to the
inset with the nuts (included with the
panel).
© Travis Industries
Use the larger DVL
Insert Bracket
Discard the smaller
DVS Insert Bracket
Lower Panel
4060111
41
Secure the lower panel to the bracket
with the nuts (included with the panel).
Top Clip
Use tape to secure the clips to the
bracket (you may also wedge the clips
into place). This holds the clips in place
during installation.
100-01175