ESP STING Mini User Manual page 6

To install the STING Mini Media Center:
1. Insert the STING Mini™ CD into your CD-ROM drive in your computer.
2. Double click on the sting mini.exe file. The application is installed in a
default location and an icon is placed on your desktop for quick access.
For more information on the Media Center, see
Media Center.
Setting Current Time
The memory chip in the STING Mini contains a real-time clock, used to
attach a timestamp to each recording. You must set the current time after
receiving the unit, using the instructions below. The time is saved to
persistent memory, so there is no need to set it again, unless you move to
another time zone.
To set the current time on the STING Mini:
1. Connect the USB cable (supplied) to the STING Mini device.
2. Turn on the STING Mini using the On/Off Button.
3. Connect the other end of the USB cable to a vacant USB port on your
PC.
4. Wait for the device to be recognized by Windows. Usually, this is
indicated by a message box indicating that Windows has recognized a
new device.
5. Start the STING Mini Media Center by clicking its desktop icon.
6. Make sure your Windows clock is accurate. To change it, double-click
the clock at the bottom-right of the screen.
7. In the STING Mini Media Center, in the Time/Date area, click the
Setup button. The Time/Date Setup window opens with the current
time and date of your computer already configured in the appropriate
field.
Mini-STING User Guide
The CD contains files for both the STING Mini as
well as other STING products. Before installing the
Media Center, verify that you are accessing the
appropriate sub folder.
Getting Started
Using the STING Mini
5