Returning To Factory Default - ESP STING Mini User Manual

Returning to Factory Default

While STING Mini is booting up the Record's LED is solid red and the SD
Status LED is flashing green. After approximately 25 seconds, the Record
LED changes to green (if there is a media card inserted in the STING Mini,
otherwise it is red), and the SD Status LED indicates the current setting
for the recording mode.
At this point, you have up to 10 seconds to return the unit to its default
factory settings.
To return to factory default settings:
• Press and hold the Erase button. The LED will flash once to indicate
that it has successfully returned to the default settings.
If you do not see this LED flash, it is possible that you waited too long. In
this case, shut the unit and turn it back on, and after 25 seconds, when the
LEDs stop flashing, quickly press and hold the Erase button.
Mini-STING User Guide
Recording with STING Mini
11