Maintenance and Troubleshooting
The STING Mini does not require special maintenance. Other than keeping
the unit away from moisture, dirt or excessive heat, and occasionally
cleaning it with a damp cloth and wiping it dry, it needs no regular
maintenance other than recharging the battery. Do not use Acetone,
Benzene or any other alcoholic agents when cleaning the unit. Following are
some troubleshooting hints, should you have some difficulty with the unit:
Troubleshooting
Unit Does Not Turn On
Probable cause: Dead or uncharged battery
Corrective Action: Charge the battery (see page 4). If the problem persists,
send in for service.
Cannot Start Recording
Probable causes:
•
A/V cable disconnected
•
No SD card
Corrective Action: Check connection to the A/V cable RCA sockets and to the
camera, and check that a SD card is plugged. If this doesn't solve the problem,
replace the camera.
R/C cable vibrates 10 consecutive times
Probable Cause: Low memory or low battery
Corrective Action: Charge battery and/or replace SD card.
R/C Cable Vibrates Continuously
Probable Causes:
•
Disconnected video cable
•
SD card came out
Corrective Action: Turn the STING Mini off. Ensure the video cable is plugged
in and the SD card is pushed in fully. Turn on again.
Mini-STING User Guide
Maintenance and Troubleshooting
19
Need help?
Do you have a question about the STING Mini and is the answer not in the manual?