Configuring Rtsp; Configuring Server And Http Ports - HIKVISION DS-7600NI-E1/A User Manual

4. Click the Apply button to save and exit the interface.
The multicast function should be supported by the network switch to which the NVR is connected.

12.2.8 Configuring RTSP

Purpose:
The RTSP (Real Time Streaming Protocol) is a network control protocol designed for use in communication
systems to control streaming media servers.
Steps:
1. Enter the Network Settings menu
Menu > Configuration > Network
2. Select the More Settings tab to enter the More Settings menu, as shown in Figure 12. 15.
3. Enter the RTSP port in the text field of RTSP Service Port. The default RTSP port is 554, and you can
change it according to different requirements.
4. Click the Apply button to save and exit the menu.

12.2.9 Configuring Server and HTTP Ports

Purpose:
You can change the server and HTTP ports in the Network Settings menu. The default server port is 8000 and the
default HTTP port is 80.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the More Settings tab to enter the More Settings interface, as shown in Figure 12. 15.
3. Enter new Server Port and HTTP Port.
4. Enter the Server Port and HTTP Port in the text fields. The default Server Port is 8000 and the HTTP Port is
80, and you can change them according to different requirements.
5. Click the Apply button to save and exit the interface.
The Server Port should be set to the range of 2000-65535 and it is used for remote client software access. The
HTTP port is used for remote web browser access.
User Manual of All-in-One Network Video Recorder
Figure 12. 17 RTSP Settings Interface
Figure 12. 18 Host/Others Settings Menu
138