Module Diagnostic Items; Viewing And Clearing The Event Queue - Allen-Bradley 1203-SSS User Manual

Module Diagnostic Items

The following diagnostic items can be accessed using DriveExplorer
(version 2.01 or higher).
No. Name
1 Common Logic
Cmd
2 Prod Logic Cmd Current value of the Product Specific Logic Command being
3 Reference
4 Common Logic
Sts
5 Prod Logic Sts
6 Feedback
7 DPI Rx Err Cntr Current value of the DPI CAN Receive Error Counter register.
8 DPI Rx Err Max Maximum value of the DPI CAN Receive Error Counter register.
9 DPI Tx Err Cntr Current value of the DPI CAN Transmit Error Counter register.
10 DPI Tx Err Max Maximum value of the DPI CAN Transmit Error Counter register.
11 Field Flash Cntr Current value of the Field Flash Counter.
12 CPU

Viewing and Clearing the Event Queue

It is normal for the event queue in the serial converter to contain events.
If you encounter unexpected communication problems, you can access
the event queue and view the most recent events.
To view the event queue
1. Access the event queue using a configuration tool. Refer to
Configuration Tools
2. Scroll through events in the event queue. The most recent event can
be found at 2R > Event Queue 1.
Description
Current value of the Common Logic Command being transmitted
to the host by this peripheral.
transmitted to the host by this peripheral.
Current value of the Product Specific Reference being
transmitted to the host by this peripheral.
Current value of the Common Logic Status being received from
the host by this peripheral.
Current value of the Product Specific Logic Status being received
from the host by this peripheral.
Current value of the Product Specific Feedback being received
from the host by this peripheral.
CPU Type.
in Chapter 3.
Troubleshooting 4-3