3-6
Configuring the Serial Converter
8. Select the settings shown in
Important: If you have previously set Parameter 03 - [DF1 Rate
Figure 3.4 Properties Dialog Box
9. Click OK. A blank HyperTerminal workspace appears.
10. Select File > Properties to display the Properties dialog box.
11. Click the Settings tab. See
12. Under Function, arrow, and ctrl keys act as, select Terminal keys.
13. In the Emulation box, select VT100.
Figure
Cfg] to 19.2K or 38.4K, select that value in the Bits per
second box.
Figure
3.4.
3.5.