Parameter List; Setting The Serial Port Rate - Allen-Bradley 1203-SSS User Manual

3-8 Configuring the Serial Converter
To navigate in the terminal emulation software
Key
. . .
0
Esc
OR
OR
Enter

Setting the Serial Port Rate

The serial port rate, sometimes called baud rate or DF1 rate, is the speed
at which the computer and serial converter communicate. You can select
a serial port rate of 9600, 19.2K, or 38.4K with the serial converter
(Series B). The factory-default serial port rate is 9600.
Important: If you change the serial port rate in the serial converter, you
To set the serial port rate
1. Set Parameter 03 - [DF1 Rate Cfg] to the desired rate.
Figure 3.7 DF1 Rate Cfg Parameter in HyperTerminal
Press the UP ARROW or DOWN ARROW key to scroll
through the parameter list. Press the LEFT ARROW or
RIGHT ARROW key to modify parameter values. Press
the ENTER key to save a new value.
3> DF1 Rate Cfg = 9600
2. Reset the serial converter. Refer to
this chapter.
3. Set the serial port rate in your software to match the new serial port
rate in the serial converter.
Description
In the main menu, keys 1 – 3 select a menu option.
9
In the parameter screen, keys 0– 9 enter a value.
Display the main menu or abort changes to a parameter.
Scroll through parameters or events.
Scroll through the values for a parameter.
Save a value for a parameter.
must set your software to use the same serial port rate.
Resetting the Serial Converter in