Deleting Clip Lists From A Disc; Unit Memory; Presetting The Initial Timecode Of The Current Clip List - Sony PDW-V1 Operation Manual

3
Use the F or f button or jog dial to select the desired
clip list, and then press the g button.
A confirmation message like the one shown below
appears.
LOAD CLIP LIST
LOAD E0002 OK ?
LOAD :
TO MENU : MENU KEY
4
Press the SET button.
The selected clip list is loaded into the unit memory as
the current clip list.
If an unsaved current clip list exists in the unit
memory
A warning message like the following appears.
"CLIP LIST IS NOT SAVED. OVERWRITE CLIP
LIST?"
Press the SET button to overwrite the unsaved current clip
list, or press the MENU button to quit without overwriting.
To display thumbnails of the sub clips in the
newly loaded current clip list
Press the SUBCLIP button, and then press the
THUMBNAIL button.

5-3-2 Deleting Clip Lists From a Disc

1
Display the CLIP menu.
See "To display the CLIP menu" (page 52).
2
Use the F or f button to move the cursor to DELETE,
and then press the g button.
A list of clip lists appears.
The date of creation or the title is displayed for each
clip list.
To switch between display of dates of creation,
titles, and clip list names
With the SHIFT button held down, press the SET
button.
With each press, the display changes as follows.
Dates of creation > titles > clip list names > dates of
creation ...
3
Use the F or f button or the jog dial to select the
desired clip list, and then press the g button.
SET KEY
A confirmation message like the one shown below
appears.
DELETE CLIP LIST
DELETE E0001 OK ?
DELETE :
TO MENU : MENU KEY
4
Press the SET button.
The selected clip list is deleted from the disc.
5-3-3 Clearing the Current Clip List
From the Unit Memory
This operation clears the current clip list, so that no clip list
is loaded in the unit memory.
1
Display the CLIP menu.
See "To display the CLIP menu" (page 52).
2
Use the F or f button to move the cursor to CLEAR,
and then press the g button.
A message like the one shown below appears.
CLEAR CLIP LIST
CLEAR OK ?
CLEAR :
TO MENU : MENU KEY
3
Press the SET button.
The current clip list is cleared from the unit memory.
5-3-4 Presetting the Initial Timecode
of the Current Clip List
When the unit is powered on, and when you insert a new
disc, the initial timecode of the current clip list is set to
"00:00.00.00." You can set the initial timecode to any
value.
5-3 Managing Clip Lists (CLIP Menu)
SET KEY
SET KEY
53