Basic Menu Operations - Sony PDW-V1 Operation Manual

Item Item name
number
031 RECORDING FORMAT
032 LCD MONITOR MODE
034 MENU STATUS DISPLAY
ON VIDEO MONITOR
036 FILE NAMING FORM
B01 RECALL SETUP BANK-1
B02 RECALL SETUP BANK-2
B03 RECALL SETUP BANK-3
B11 SAVE SETUP BANK-1
B12 SAVE SETUP BANK-2
B13 SAVE SETUP BANK-3
B20 RESET SETUP MENU
a) This is supported from firmware version 1.4.

7-2-2 Basic Menu Operations

This section describes the basic menu display and how to
change the settings.
Displaying the menu
MENU button
L
CH-1 CH-2 CH-3
R
ACCESS
SUBCLIP THUMBNAIL
NETWORK
LOCAL
REMOTE
CLIP ESSENCE
MENU MARK
PREV PLAY NEXT
TOP F REV F FWD END
NEXT button
74
7-2 Basic Setup Menu
Settings
Select the recording format.
IMX50 (IMX 50Mbps): MPEG IMX 50 Mbps
IMX40 (IMX 40Mbps): MPEG IMX 40 Mbps
IMX30 (IMX 30Mbps): MPEG IMX 30 Mbps
DVCAM: DVCAM
Set the aspect ratio for the image display.
auto: the aspect ratio of the display screen automatically adjusts to the aspect ratio of
the input material.
16:9: set the aspect ratio to 16:9.
4:3: set the aspect ratio to 4:3.
Specify whether to display the setup menu status at the left edge of the status display
a)
line when basic menu item 005 "DISPLAY INFORMATION SELECT" is set to "T&sta."
dis (disable): Do not display.
ena (enable): Display. (The display is visible only when no disc is loaded, and during
insertion and ejection of a disc.)
b)
Specify the clip and clip list naming format. (Specify whether to allow use of files with
user-defined names.)
C****: Standard format (Do not allow use of files with user-defined names)
free: Free format (Allow use of files with user-defined names)
See 6-1-3 "Assigning User-Defined Clip and Clip List Names" (page 59) for details
about how to make the settings.
Set to "on" to recall menu settings from menu bank 1.
Set to "on" to recall menu settings from menu bank 2.
Set to "on" to recall menu settings from menu bank 3.
Set to "on" to save current menu settings to menu bank 1.
Set to "on" to save current menu settings to menu bank 2.
Set to "on" to save current menu settings to menu bank 3.
a)
Set to "on" to return the settings of the current menu to the factory default settings. Set
to "bank-4" to set the current menu to the settings saved in menu bank 4.
off
on (on (default)): Return the current menu to the factory default settings.
bank-4: Set the current menu to the settings saved in menu bank 4.
SHUTTLE button
SHUTTLE JOG
AUDIO MONITOR
L
CH-4 CH-5 CH-6 CH-7 CH-8
R
MENU SET RESET SHIFT
MARK1
SYSTEM S.SEL
MENU
STOP
IN OUT
MARK2
STOP button
b) This is supported from firmware version 1.5.
Press the MENU button.
The SHUTTLE button and NEXT button light and the
setting of the currently selected menu item appears in the
image display and status display. (The STOP button also
lights when a menu item with sub-items is selected.)