4
At the scene where you want to set a new In or Out
point, hold down the G/IN button (to change the In
point) or the g/OUT button (to change the Out point)
and press the SET button.
Depending on the button that you pressed, a new In or
Out point is set, and the IN or OUT indicator lights.
To change both the In and Out points
Carry out steps 3 and 4 for both the In and Out points.
To reset the In or Out point
With the G/IN button or g/OUT button held down,
press the RESET button. The In or Out point is
restored to the value it had before the sub clip trim
screen opened.
To cue up the In or Out point
With the G/IN button held down, press the PREV
button. Or with the the g/OUT button held down, press
the NEXT button.
Note
You can escape from the sub clip trim screen to full-
screen display without executing a trim if you press the
THUMBNAIL button.
5
Once you have set the new In point or Out point, hold
down the SHIFT button and press the SET button.
The trim is executed, and you return to the sub clip
thumbnail display.
To cancel the trim
Reset the In or Out point to the value it had before you
entered the sub clip trim screen, and then hold down
the SHIFT button and press the SET button.
6
Save the current clip list to disc.
See 5-2-6 “Saving the Current Clip List to Disc” (page
50).
Page 49
5-2 Creating Clip Lists