Table of Contents
Advertisement
Menu items in the 600s, relating to the time code reader, metadata, and UMID
Item number Item name
652
UMID SDI VANC LINE
657
ESSENCE MARK SDI OUTPUT
660
ESSENCE MARK SDI VANC LINE
b) This is supported from firmware version 1.4.
Item number Item name
703
BLANK LINE SELECT
Sub-item
1
2 ... 9 LINE 12 ...
10
2 ...
10
11
2 ...
15
16
705
EDGE SUBCARRIER
REDUCER MODE
80
7-3 Extended Menu
Menu items in the 700s, relating to video control
Settings
Switch blanking of the video output signal on or off for individual lines in the
vertical blanking interval.
The Y/C signal and odd/even fields are blanked simultaneously.
ALL LINE
- - -: Specify the blanking for each line separately.
blnk (blank): Regardless of the setting of other sub-items, blank all lines
thru (throu): Regardless of the setting of other sub-items, switch off
In 525(U)
Specify blanking for lines 12 to 19.
LINE 19
line mode
blnk (blank): Carry out blanking.
thru (throu): Switch off blanking.
LINE 20
Specify blanking for line 20.
blnk (blank): Carry out blanking.
half: Carry out half-blanking.
thru (throu): Switch off blanking.
LINE 12 ...
In 525(J)
Specify blanking for lines 12 to 20.
LINE 20
line mode
blnk (blank): Carry out blanking.
thru (throu): Switch off blanking.
LINE 21
Specify blanking for line 21.
blnk (blank): Carry out blanking.
half: Carry out half-blanking.
thru (throu): Switch off blanking.
LINE 9, 322 ...
In 625 line
Specify blanking for lines 9, 322 to 22, 335.
LINE 22, 335
mode
blnk (blank): Carry out blanking.
thru (throu): Switch off blanking.
LINE 23
Specify blanking for line 23.
half: Carry out half-blanking.
thru (throu): Switch off blanking.
Select whether to enable the edge subcarrier reducer (ESR).
on: Enable.
off: Do not enable.
When playing back a composite signal, set this to "on."
Settings
Select the line in which UMID is output when menu item 651 is set to "on."
12 H (12 line), 13 H (13 line), 15 H (15 line), 16 H (16 line), 17 H (17
line), 18 H (18 line), 19 H (19 line) (525(U)/525(J) line modes)
9 H (9 line), 10 H (10 line), 12 H (12 line), 13 H (13 line), 14 H (14 line),
15 H (15 line), 16 H (16 line), 17 H (17 line), 18 H (18 line) (625 line
mode)
See 7-3-3 "Using UMID Data" (page 84) for more information about
UMID.
Select whether to output essence marks in the SDI output VANC.
off: Do not output.
on: Output.
When item 657 is set to "on," select the line to which to output essence
marks.
12 H (12 line), 13 H (13 line), 15 H (15 line), 16 H (16 line), 17 H (17
line), 18 H (18 line), 19 H (19 line) (525(U)/525(J) line modes)
9 H (9 line), 10 H (10 line), 12 H (12 line), 13 H (13 line), 14 H (14 line),
15 H (15 line), 16 H (16 line), 17 H (17 line), 18 H (18 line) (625 line
mode)
which can be specified in this menu item.
blanking for all lines which can be specified in this menu item.
Advertisement
Table of Contents
