Titan TTB364BDS Safety And Operating Manual page 5

– for tools provided with an isolating transformer: Never use the tool without
the transformer delivered with the tool or of the type as specified in these
instructions.
– Replacement of the plug or the supply cord shall always be carried out by the
manufacturer of the tool or his service organisation.
– Keep water clear off the electrical parts of the tool and away from persons in the
working area.
ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR BAND
SAW
1. Safety precautions
1) Do not use saw blade which are damaged or deformed;
2) Replace the table insert when worn;
3) Lock the work table firmly before operation;
4) Tension the saw blade properly;
5) Do not clean the saw band whilst it is in motion;
6) Wear suitable personal protective equipment, when necessary, this could include:
a) Hearing protection to reduce the risk of induced hearing loss,
b) Respiratory protection to reduce the risk of inhalation of harmful dust,
c) Gloves for handling the saw band and rough material.
2. Safe operation
1) When straight cutting against the fence use a push;
2) This saw must be attached to a solid secure work surface by means of the fixing holes
in the base.
3) Never adjust or assemble the rip fence or mitre gauge when the machine is
working;
4) When the workpiece is near to the saw blade, never use your hand to push it. Always
use the push stick provided (See 25 on main diagram)
5) Never tension the saw blade when working;
6) If need to adjust the blade guide, stop the machine first.
BAND SAW TTB364BDS