Avery Dennison Pathfinder 6057 Operator's Handbook Manual page 12

3. Spread the supply holder tabs apart with one hand so it adjusts to the size of your supply
roll.
4. Press the supply lock tab all the way down (towards the inside of the printer) to lock the
supply holder at 1.2". Adjust it to the middle position to lock the supply holder at 1.5".
Adjust it all the way up (towards the opening of the printer) to lock the supply holder at 2.0"
5. Place the supply roll in the supply holder so the supply feeds from the bottom.
6. Continue loading supply for the printing mode you want (peel or non-peel).
3-2 Operator's Handbook
Supply Holder
Supply Lock Tab