Muratec MFX-2030 Network Manual page 56

Plain-paper digital fax/copier/printer/scanner
Hide thumbs Also See for MFX-2030:
Table of Contents

Advertisement

Setting
Name
Sender
Information
E-mail address
Sending mail (SMTP)
server
Receiving mail (POP3)
server
User ID for POP3
Password for POP3
Check for New Mail
Mail Server
Receive before Send.
SMTP Port No.
POP3 Port No.
Select POP3 Auth.
Method
Select SMTP Auth.
Method
User ID for SMTP
Password for SMTP
Description
Enter a name that is displayed in the sender field of
the e-mail sent from your machine.
Up to 40 characters can be registered.
Enter an e-mail address assigned to your machine.
Up to 50 characters can be registered.
Enter a domain name or an IP address of the SMTP
server for sending e-mail.
When entering a domain name, you can enter up to 50
characters.
Enter a domain name or an IP address of the POP3
server for receiving e-mail.
When entering a domain name, you can enter up to 50
characters.
Enter the user ID used when logging on to the POP3
server.
Up to 50 characters.
Enter the password used when logging on to the POP3
server.
Up to 50 characters.
This setting establishes the interval at which the mail
server is checked for new mail. The minimum value is
5 seconds and the maximum is 99 hr 59 min 59 sec.
The initial value is 10 min.
To keep this system from checking for e-mail auto-
matically, set all of these values to 0.
For some providers, POP authentication is required
before sending (send request to SMTP server). In this
case, check this item.
Enter the SMTP port number. (1–65535)
Default: 25
Enter the POP3 port number. (1–65535)
Default: 110
APOP (Authenticated POP) is a POP security protocol
that encrypts the POP password when connecting
with the POP server. If APOP is available on the POP
server you are using, select "APOP". Otherwise, select
"Normal".
Select the SMTP authentication method if the SMTP
server you are using requires authentication.
Enter the user ID used when logging on to the SMTP
server, if necessary.
Up to 50 characters can be registered.
Enter the password used when logging on to the
SMTP server, if necessary.
Up to 50 characters can be registered.
E-mail / I-Fax settings
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
4-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

F-560Mfx-1430F-520

Table of Contents