Avery Dennison Monarch Sierra Sport4 9493 Operator's Handbook Manual page 15

Note: Make sure the guides are straight after you adjust them.
Insert the core between the supply holder tabs to open them to their widest position.
3.
Position a stack of fan-fold supplies so they feed easily into the front of the printer.
4.
Feed the fan-fold supply into the supply slot under the supply door and between the supply
5.
guides on the core so that a few inches extend past the front of the printer. Center the
supply across the platen roller.
Close the printer. See "Opening & Closing the Printer" for more information. Make sure the
6.
printing side of the supply faces up after you close the printer.
Turn on the printer if it is not already on.
7.
Press under
8.
supply error, see Chapter 4, "Troubleshooting."
once or twice to advance the supply under the printhead. If you receive a
Supply Slot
Loading Ribbon & Supplies 2-7