Onboard Devices Configuration - Advantech AIMB-542 Series User Manual

2.4.4 Onboard Devices Configuration
Configure Win627EHG Super IO Chipset
Quick Resume Technology
HD Audio Controller
Front Panel Support Type
Onboard PCIEX GbE LAN
LAN Option ROM
ITE8211F Controller
Detecting Device Time
Serial Port1 Address
Parallel Port Address
Parallel Port Mode
ECP Mode DMA Channel
Parallel Port IRQ
HD Audio Controller [Enabled]
Enables or disables the Azalia/AC'97 CODEC.
Configuration options: [Enabled] [Disabled]
OnBoard PCIEX GbE LAN [Enabled]
Allows you to enable or disable the onboard PCI Express Gigabit LAN controller.
Configuration options: [Disabled] [Enabled]
LAN Option ROM [Disabled]
Allows you to enable or disable the option ROM in the onboard LAN
controller. This item appears only when the Onboard LAN item is set to
Enabled. Configuration options: [Disabled] [Enabled]ITE8211F Controller
[Enabled]
Enables or disables the onboard ITE
Configuration options: [Enabled] [Disabled]
Detecting Device Time [Quick Mode]
Sets the ITE8211F detecting device time. If the devices installed on the ITE
IDE connector cannot be detected, set this item to Standard Mode to enable
complete detecting process. This item appears only when the ITE8211F
Controller is Enabled.
Configuration options: [Standard Mode] [Quick Mode]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
2-16
[Enabled]
[Enabled]
[AC97]
[Enabled]
[Disabled]
[Enabled]
[Quick Mode]
[3F8/IRQ4]
[378]
[ECP]
[DMA3]
[IRQ7]
®
8211F IDE controller.
Chapter 2: BIOS setup