Cpu And Chassis Fan Connectors - Advantech AIMB-542 Series User Manual

3. Serial ATA connectors (7-pin SATA1, SATA2)
These connectors are for the Serial ATA signal cables for Serial ATA hard disk
drives.
SATA connectors
Install the Windows
or later before using Serial ATA.
4.

CPU and Chassis fan connectors

(4-pin CPU_FAN, 3-pin CHA_FAN)
The fan connectors support cooling fans of 350mA~740mA (8.88W max.) or
a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the fan
connectors on the motherboard, making sure that the black wire of each cable
matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient air
flow inside the system may damage the motherboard components. These are
not jumpers! DO NOT place jumper caps on the fan connectors.
Fan connectors
1-28
SATA 2
SATA 1
2000 Service Pack 4 or the Windows
®
CHA_FAN
Rotation
CPU_FAN
XP Service Pack1
®
Chapter 1: Product introduction