Ide Configuration - Advantech AIMB-542 Series User Manual

PIO Mode [Auto]
Selects the PIO mode.
Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode. Configuration options: [Auto] [SWDMA0] [SWDMA1]
[SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2]
[UDMA3] [UDMA4] [UDMA5]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology. Configuration
options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Disabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]
2.3.5 IDE Configuration
The items in this menu allow you to set or change the configurations for the IDE
devices installed in the system. Select an item then press <Enter> if you wish to
configure the item.
IDE Configuration
Configure SATA As
Onboard IDE Operate Mode
Enhanced Mode Support On
OnBoard Serial-ATA BOOT ROM
IDE Detect Time Out (Sec)
Configure SATA As [Standard IDE]
Sets the Serial ATA configuration.
If you want to use your Serial ATA like a Parallel ATA physical storage interface,
select the Standard IDE option.
Configuration options: [Standard IDE]
Onboard IDE Operate Mode [Enhanced Mode]
Disables or allows selection of the IDE operation mode depending on the
operating system (OS) that you installed. Set to Enhanced Mode if you are using
native OS, such as Windows
Configuration options: [Disabled] [Compatible Mode] [Enhanced Mode]
2-8
[Standard IDE]
[Enhanced Mode]
[S-ATA]
[Disabled]
[35]
®
2000/XP/2003 Server.
Chapter 2: BIOS setup