1-1.6 Integrated Sdram Controller; 1-1.7 Multi-I/O Function; 1-1.8 Expansion Slots - SOLTEK SL-65ME-T User Manual

65ME-T/ME+-T

1-1.6 Integrated SDRAM Controller

• Providing 3pcs DIMM slots for double-sided DIMMs.
• Supporting 100/133MHz SDRAM spec.
• Supporting total memory from 32MB to 512MB using 32Mb/64Mb/128Mb/
256Mb technology.
• Supporting up to 3 double sided DIMMs at 100MHz system memory bus.
• Supporting up to 2 double sided or 3 single sided DIMMs at 133MHz system
memory bus.
• Unbuffered , Non-ECC SDRAM supported only.

1-1.7 Multi-I/O Function

• Integrated IDE Controller.
• Supporting Ultra ATA100/66, BMIDE and PIO modes Universal Serial Bus
connector:
-- USB v1.1 compliant.
-- 2 built-in USB connectors, in addition to one internal USB header which requires a
USB cable to support 2 more optional USB ports.
• Two UART's for Complete Serial Ports.
• Dedicated IR connector:
-- Third serial port dedicated to IR function either through the two complete serial
ports or the third dedicated port Infrared-IrDA (HPSIR) and ASK (Amplitude Shift
Keyed) IR.
• Multi-mode parallel connector supporting:
-- Standard mode, ECP and EPP.
• Floppy Disk connector supporting:
-- One FDD connector with drive swap support .
• Universal Serial Bus connector supporting:
-- USB v1.1 and Intel Universal HCI v1.1 compatible.
-- 2 built-in USB connectors and one USB Header (USB1) which requires an
optional USB cable to provide 2 more optional USB ports.
• PS/2 Keyboard connector.
• PS/2 Mouse connector.

1-1.8 Expansion Slots

• Five PCI bus Mater slots.
• One AGP 4x mode slot.
• One CNR slot.
• Three DIMM slots.
• One SCR (Smart Card Reader) slot.
10