SOLTEK SL-65ME-T User Manual page 87

Redstorm
Overclocking
Tech
Auto Detect
DIMM/PCI CLK
Spread Spec-
trum Modulated
Linear Spread
Model
Linear Spread
Range
CPU Skew
Adjust
PCI Skew Adjust This item allows you to reduce PCI transfer rate.
Please press <Enter> to start RED STORM OVER-
CLOCKING TECH, this option helps user an easy
way to overclocking, it will increase CPU external
clock automatically, when CPU external clock in-
creasing to unacceptable value, BIOS will restart
your system, then running at acceptable CPU ex-
ternal clock.
To reduce the occurrence of electromagnetic
interference (EMI), the BIOS detects the presence
or absence of components in DIMM and PCI slots
and turns off system clock generator pulses to empty
slots.
When the system clock generator pulses, the
extreme values of the pulse generate excess EMI.
Enabling pulse spectrum spread modulation
changes the extreme values from spikes to flat
curves, thus reducing EMI. This benefit may in some
cases be outweighed by problems with timing-critical
devices, such as a clock-sensitive SCSI device.
This item allows you to enable/disable the linear
spread model.
The choices: Enabled; Disabled.
This item allows you to enable/disable the linear
spread range.
The choices: Enabled; Disabled.
This item allows you to reduce CPU transfer rate.
Users should leave this item at default value.
The choices: Disabled; 150ps; 300ps; 450ps.
Users should leave this item at default value.
The choices: Disabled; 150ps; 300ps; 450ps.
87
Chapter 4 BIOS Setup