2-5.6 Complex Header J2&J3 - SOLTEK SL-65ME-T User Manual

65ME-T/ME+-T
2-5.6 Complex Header J2&J3
• This complex Header consists of 10 connectors providing various supports:
POWER SWITCH
2
INFRARED(IR)
3
2nd HDD LED
4
1st HDD LED
4
1. J2 SMI Connector (System Management Interrupt):
CONNECTION: This 2-pin connector is connected to the case-mounted
FUNCTION
2. J2 Power Switch Connector:
CONNECTION: Connected to a momentary button or switch.
FUNCTION
3. J2 IR Connector (Infrared Connector):
CONNECTION: Connected to Connector IR on board.
FUNCTION
4. J2 1st HDD LED Connector / J2 2nd HDD LED Connector:
CONNECTION: Connected to HDD LED.
FUNCTION
5. J3 Suspend LED Connector:
CONNECTION: Connected to Suspend indicator.
FUNCTION
GND
SMI
1
SMI SIGNAL
Vcc
ATX POWER SWITCH
Vcc
NO CONNECTION
INFRARED TRANSMIT SIGNAL
GND
INFRARED TRANSMIT SIGNAL
(+)
Logic High
(-)
HDD LED SIGNAL
(-)
HDD LED SIGNAL
(+)
Logic High
Suspend Switch.
: Manually placing the system into a Suspend mode or
"Green" mode.
: Manually switching the system between "On" and "Soft
Off". Pressing the momentary button for more than 4
seconds will also turn the system off.
: Supporting wireless transmitting and receiving module
on board.
: To supply power to HDD LED.
: To supply power to "Suspend indicator".
J2J3
15 15
GND
SUSPEND LED SIGNAL
GND
KEYLOCK SIGNAL
(-)
GND
NO CONNECTION
(+)
Vcc
GND
RESET SIGNAL
Vcc
GND
NO CONNECTION
SPEAKER SIGNAL
1 1
32
SUSPEND LED
5
KEYLOCK
6
CONNECTOR
POWER LED 7
RESET SWITCH
8
SPEAKER
9