Extensible Firmware Interface Specification
// If set, at least one receive interrupt occurred.
#define PXE_STATFLAGS_GET_STATUS_RECEIVE
// If set, at least one transmit interrupt occurred.
#define PXE_STATFLAGS_GET_STATUS_TRANSMIT
// If set, at least one command interrupt occurred.
#define PXE_STATFLAGS_GET_STATUS_COMMAND
// If set, at least one software interrupt occurred.
#define PXE_STATFLAGS_GET_STATUS_SOFTWARE
// This flag is set if the transmitted buffer queue is empty.
// This flag will be set if all transmitted buffer addresses get
// written into the DB.
#define PXE_STATFLAGS_GET_STATUS_TXBUF_QUEUE_EMPTY
// This flag is set if no transmitted buffer addresses were
// written into the DB.
// small.)
#define PXE_STATFLAGS_GET_STATUS_NO_TXBUFS_WRITTEN
//*******************************************************
// UNDI Fill Header
//*******************************************************
// No additional StatFlags
//*******************************************************
// UNDI Transmit
//*******************************************************
// No additional StatFlags.
//*******************************************************
// UNDI Receive
//*******************************************************
// No additional StatFlags.
404
(This could be because DBsize was too
12/12/00
0x0001
0x0002
0x0004
0x0008
0x0010
0x0020
Version 1.02
Need help?
Do you have a question about the Extensible Firmware Interface and is the answer not in the manual?